Ethernet Modul Tibbo EM1206 programable in BASIC OEM Serial/Ethernet
Kurzbeschreibung
The module's hardware mix, which includes 100Base/T Ethernet, four serial ports, flash disk, EEPROM, and RTC, has been carefully tailored to address the typical needs of network-enabled control applications. This makes the EM1206 especially suitable for "connected" edge products such as sensors, network-enabled card readers, actuators, and other lightweight devices. The EM1206 can also support Wi-Fi communications (this requires GA1000 add-on board), as well as external LCD, keypad, and buzzer. The EM1206 can be ordered standalone or in combination with the RJ203 module.
Technische Daten:
Größe
|
33,2 mm x 18,1 mm x 5,5 mm
|
Ethernet Interface
|
10/100BaseT
|
Anzahl der I/O Leitungen
|
17
|
Max. Betriebsstrom
|
230 mA
|
Ethernet-Magnetics
|
-
|
Ethernet Anschluß (RJ45)
|
-
|
Durchschnittliche Leistungsaufnahme
|
230mA, 3,3V DC
|
Geräte-Temperatur während des Betriebs
|
25 °C
|
Serieller Port
|
4 x UART, Wiegand, clock/data
|
Flash Speicher
|
512 KB
|
EEPROM Speicher
|
2040 B
|
Unterstützte Netzwerk-Protokolle
|
UDP, TCP, ICMP (ping), and HTTP (Others -> Tibbo BASIC)
|
Nominal Versorgungsspannung
|
3,3 V
|
Max Relative Luftfeuchtigkeit
|
90 %
|
Serial-over-IP
|
+
|
Betriebstemperatur
|
-10°C - 70°C
|
Mentés
Technische Beschreibung
10 / 100BaseT Ethernet port Four serial ports; up to 17 I/O lines RJ203 connector can be fitted Flash disk and built-in RTC It supports Wi-Fi, LCD, keypad, buzzer
|
Produktcode: |
305218 |
Hersteller: |
Tibbo
|
Stück/Verpackung:
|
1 St.
|
Mindestmenge:
|
1 St.
|
?>
|