Ethernet Modul Tibbo EM1206 programable in BASIC OEM Serial/Ethernet
Brief description
The module's hardware mix, which includes 100Base/T Ethernet, four serial ports, flash disk, EEPROM, and RTC, has been carefully tailored to address the typical needs of network-enabled control applications. This makes the EM1206 especially suitable for "connected" edge products such as sensors, network-enabled card readers, actuators, and other lightweight devices. The EM1206 can also support Wi-Fi communications (this requires GA1000 add-on board), as well as external LCD, keypad, and buzzer. The EM1206 can be ordered standalone or in combination with the RJ203 module.
Technical attributes:
Size
|
33,2 mm x 18,1 mm x 5,5 mm
|
Ethernet Interface
|
10/100BaseT
|
Number of I/O lines
|
17
|
Max. operating current
|
230 mA
|
Ethernet Magnetics
|
-
|
Ethernet connector (RJ45)
|
-
|
Average Power Consumption
|
230mA, 3,3V DC
|
Device temperature during operation
|
25 °C
|
Serial Port
|
4 x UART, Wiegand, clock/data
|
Flash memory
|
512 KB
|
EEPROM memory
|
2040 B
|
Supported network protocols
|
UDP, TCP, ICMP (ping), and HTTP (Others -> Tibbo BASIC)
|
Nominal power supply voltage
|
3,3 V
|
Max operating relative humidity
|
90 %
|
Serial-over-IP
|
+
|
Operating temperature
|
-10°C - 70°C
|
Mentés
Technical Description
10 / 100BaseT Ethernet port Four serial ports; up to 17 I/O lines RJ203 connector can be fitted Flash disk and built-in RTC It supports Wi-Fi, LCD, keypad, buzzer
|
Product Code: |
305218 |
Manufacturer: |
Tibbo
|
Pieces/Packages:
|
1 pcs
|
Minimum order quantity:
|
1 pcs
|
?>
|